The Most Basics of Car Maintenance ...

The Most Basic Thing You Have to Check before You Start a Journey In Your Car Are,




1. Check the Tires - Check them for their nice shape and satisfactory air pressure.

 
2.  Radiator Coolant Level - Check the radiator for water/coolant level. It should be at maximum level.

3.  Engine Oil Level - Check using the dip-stick for correct oil level. It should be between low and high.

4. Windshield Washer - Check windshield washer for correct water/washing reagent level.

5. Check the Lights - Check head,tail,signal,break,reverse,fog(if have) lamps for the correct operation.

 
6. Look at Dash Indicators - All dash indicators must be gone off after you turn on the engine.

7. Check the Breaks - As you start your journey, apply the breaks twice and check for its operation carefully.

Following Above Seven Simple Car Tips Will Bring You Longer for Sure! 

Why & How to Clean Underside of My Car....?

You know, the whole car is on the chassis of your car and most of hard parts of the chassis belongs to the underside of the car. If the this chassis get corrosion and loss its hardness, the whole car including you are in big trouble. So we must keep it corrosion free always. For that purpose we need to clean it in shorter intervals.

This can be easily done at a service station for some

less amount of cash.But even if the better way is to going to a service station, you can do it at your home at a low cost. You just need some brushes, car wash detergents, a high pressure water supply ( high means high OK) and a way to lift the car for some amount. Since this is a routine process, you can prepare a small ramp using something like concrete at your back yard with the help of a mason and you may prepare the high pressure waterline using a water pump connected one end to your home water tank and the other end to high pressure pipe fitted to a smaller nozzle.

Using a system described above you may properly wash the under body of the car very easily. After washing, allow the underside to dry properly. If your car is a new model, the job is almost finish now. But if you have an older car that only has underside with only metallic surface, grease the underside with a grease pump properly for added safety.